Meraki Vpn Client Download Windows 10

Posted onby

The Meraki Client VPN RADIUS instructions support push, phone call, or passcode authentication for desktop and mobile client connections that use SSL encryption. This configuration does not feature the interactive Duo Prompt for web-based logins. My org uses Meraki MX firewalls as VPN endpoints. Up until now we've just been using the native Windows 10 VPN client. However, I've been tasked with finding a 3rd party alternative. Some of our users don't like the Windows 10 client and others are complaining that their VPN settings are wiped out after large Windows updates.

For additional information, refer to the AnyConnect configuration guide.

Client Download

Meraki vpn setup

Unlike the ASA, the MX does not support web deploy or web launch, a feature that allows end users to access a web page on the AnyConnect server to download the AnyConnect client. With the MX, there are download links to the client software on the AnyConnect settings page on the dashboard, however, the download links are only available to the Meraki dashboard admin and not the end user. We do not recommend sharing the down link with users as the link expires after every five minutes of loading the AnyConnect settings page.

We recommend downloading the AnyConnect client directly from as there may be an updated version in the Cisco repository. Refer to the doc for the AnyConnect clientrelease notes. We also recommend using either Meraki Systems Manager, an equivalent MDM solution, or Active Directory to seamlessly push the AnyConnect software client to the end user's device.

AnyConnect requires a VPN client to be installed on a client device. The AnyConnect client for Windows, MacOS, and Linux are available on the Client Connection section of the AnyConnect configuration page on the dashboard and can be downloaded by a Meraki dashboard administrator. Please note, the download links on the Meraki dashboard expire after five minutes. The AnyConnect client for mobile devices can be downloaded via the respective mobile stores. You can also download other versions (must be version 4.8 or higher) of the AnyConnect client from if you have an existing AnyConnect license. AnyConnect web deploy is not supported on the MX at this time.

  • Installing the AnyConnect client
  • You only need the VPN box checked. Once the client has been installed on the device, open the AnyConnect application and specify the hostname or IP address of the MX (AnyConnect server) you need to connect to.

AnyConnect Profiles

An AnyConnect profile is a crucial piece for ensuring easy configuration of the AnyConnect client software, once installed. The MX does not support the use of custom hostnames for certificates (e.g. The MX only supports use of the Meraki DDNS hostname for auto-enrollment and use on the MX. With the Meraki DDNS hostname (e.g. not as simply as a custom hostname, the need for AnyConnect profiles cannot be overemphasized. Profiles can be used to create hostname aliases, thereby masking the Meraki DDNS with a friendly name for the end user.

Cisco AnyConnect client features are enabled in AnyConnect profiles. These profiles can contain configuration settings like server list, backup server list, authentication time out, etc., for client VPN functionality, in addition to other optional client modules like Network Access Manager, ISE posture, customer experience feedback, and web security. It is important to note that at this time, the Meraki MX does not support other optional client modules that require AnyConnect head-end support. For more details, see AnyConnect profiles.

When a profile is created, it needs to get pushed to the end user's device. There are three ways to do this.

1. Through the AnyConnect server (MX): If profiles are configured on the dashboard, the MX will push the configured profile to the user's device after successful authentication.
2. Through an MDM solution: Systems Manager, an equivalent MDM solution, or Active Directory can be used push files to specific destinations on the end user's device. Profiles can also be pushed to the following paths:

%ProgramData%CiscoCisco AnyConnect Secure Mobility ClientProfile


Mac OS X


3. Manually: Profiles can also be preloaded manually to the same paths as listed above.

How to Create a Profile

Profiles can be created using the AnyConnect profile editor. The profile editor can be downloaded from the AnyConnect Settings page on dashboard or on Refer to this link for more details on AnyConnect profiles.


Meraki Vpn Client Download Windows 10 Download

Using the profile editor: The profile editor can be downloaded from the AnyConnect Settings page on dashboard or on The profile editor only runs on Windows operating systems. The screenshot below shows a configured server ton the Server List Entry option.

When configuration is complete, save the profile. It is recommended to use a unique file name to avoid profile overrides by other AnyConnect servers, then you can upload the file to the profile update section on the AnyConnect settings page.

Configure Meraki Vpn Client

Please note that only VPN profiles are supported on the MX at this time. This means you cannot push NVM, NAM, or Umbrella profiles via the MX.

Meraki Vpn Client Download Windows 10

  • Select enable profiles, upload your xml file, and save your configuration
  • After a user successfully authenticates, the configured profile gets pushed to the user's device automatically
  • The result of the .xml can be seen below, after successful authentication to the AnyConnect server; this gives users the ease of selecting VPN servers on the AnyConnect client
    The Meraki DDNS hostname is not easy to remember, therefore end users are not expected to use it directly. Profiles should be used to make connecting to the AnyConnect server easy for end users.