Service Unavailable Cisco Anyconnect

Posted onby

Originate an AnyConnect session and ensure that the failure can be reproduced. Capture the logging output from the console to a text editor and save. In order to disable logging, issue no logging enable. The Cisco AnyConnect VPN Client log from the Windows Event Viewer of the client PC: Choose Start Run. Enter: config terminal logging enable. 1) Un-install Cisco AnyConnect VPN 2) Unistall any registry cleaner softwares like CCleaner, Lenovo Rapid Boot etc. 3) Make sure the Cisco AnyConnect adapter has disapperared from Device Manager Network Adapters 4) Delete the folder C: Program Data Cisco Cisco Anyconnect Secure Mobility Client. Feb 05, 2020 In the Windows Task Manager or Mac OS X system log, you can see that the process is running. If the service is not running, you see 'System Scan: Service is unavailable' in the ISE Posture tile of the AnyConnect UI.

Installing the VPN Client

Cisco anyconnect vpn client download

Cisco Anyconnect Service Unavailable Wifi

  1. Download the AnyConnect VPN client for Windows. Note: If you're using Microsoft Edge, the program will download as a '' file. You will need to rename the file to 'sys_attachment.msi'
    • If you have the Windows Surface Pro X tablet with an ARM-based processor, you should download the AnyConnect VPN client for ARM64.
  2. Click Run on the Open File – Security Warning dialog box.
  3. Click Next in the Cisco AnyConnect Secure Mobility Client Setup dialog box, then follow the steps to complete the installation. NOTE: We recommend you un-check everything (Web Security, Umbrella, etc) except for the VPN and the Diagnostic and Reporting Tool (DART). This will give you a minimal install. The other features are not supported so there's no need to install them.

Starting the VPN Client

  1. Go to Start->Programs->Cisco->Cisco AnyConnect Secure Mobility Client to launch the program.
  2. Enter in the Ready toConnect to field, then press the Connect button.
  3. Select your desired connection profile from the Group drop-down menu:
    • UCIFULL – Route all traffic through the UCI VPN.
      • IMPORTANT: Use UCIFULL when accessing Library resources.
    • UCI – Route only campus traffic through the UCI VPN. All other traffic goes through your normal Internet provider.
  4. Enter your UCInetID and password, then click OK.
  5. A banner window will appear. Click Accept to close that window. You are now connected!

Disconnecting the VPN Client

When you are finished using the VPN, remember to disconnect.

What Is Cisco Anyconnect

  1. Right-click the AnyConnect client icon located in the system tray near the bottom right corner of your screen.
  2. Select Quit.